Description
System Highlights
- Steel Cutting Benefits
- Fume collection
- Warpage reduction
- Promote easy part retrieval
- Aluminum Cutting Benefits
- Lower the water level to improved air flow under the work-piece and promote a safer working environment
- Bubbler injects clean air under the work-piece to promote additional air circulation
- Quickly raise and lower the water level 2.5″ to aid in part recovery, minimize dross and promote air flow under the plate
- Agitating the water with the bubbling system greatly diminishes to eliminates the build-up of sludge that can occur in the anti-corrosive water pan
- Diminishes the amount of liquid needed to fill the water table simplifying the table cleaning process
Compressor Requirements
For running the bubbler while cutting the compressor must be sized to accommodate the additional flow rate. The Hypertherm manual recommends a compressor that is 2 x of the minimum requirements. With the bubbler it is recommended to run an additional 2 CFM.
| Power Unit | Minimum Requirements | @ psi | 2X | With Bubbler Running |
|---|---|---|---|---|
| 45 | 6 | 85 | 12 | 14 |
| 65 | 7.5 | 85 | 15 | 17 |
| 85 | 7.5 | 85 | 15 | 17 |
| 105 | 7.5 | 85 | 15 | 17 |
| 125 | 9.2 | 85 | 18.4 | 20.4 |
| MP200 | 6.67 | 90-100 | 13.34 | 15.34 |
