Emax 7.5 HP Silent Air two-stage air compressor with refrigerated air dryer package for a CNC plasma table

Emax 7.5 HP Silent Air Compressor with Aftercooler and 58 CFM Air Dryer, Single Phase (ESPR07V080V1PK)

A complete shop air system for a CNC plasma table: a 7.5 HP two-stage Emax Silent Air compressor with radiator aftercooler on an 80-gallon tank, bundled with a 58 CFM refrigerated air dryer. 31 CFM at 100 PSI on 230V single-phase power.

  • 31 CFM at 100 PSI, 175 PSI max
  • Radiator aftercooler and automatic tank drain
  • 58 CFM refrigerated dryer with coalescing filter
  • 230V single phase, 50 A breaker
  • Model ESPR07V080V1PK (replaces ESP07V080V1PK)

Ships by freight. Freight is quoted separately.

$9,492.00

Product total
Options total
Grand total

Description

Compressor, aftercooler and dryer as one matched air system

The Emax ESPR07V080V1PK is a 7.5 HP, two-stage Silent Air piston compressor on an 80-gallon vertical tank, built with a radiator aftercooler and bundled with a 58 CFM refrigerated air dryer. It delivers 31 CFM at 100 PSI on 230V single-phase power. That is about double Arclight’s 15 CFM at 90 PSI baseline for a single-cutter CNC plasma table, so the pump is not running flat out through long nests.

This model replaces the earlier 7.5 HP package that shipped with a 30 CFM dryer (ESP07V080V1PK). The new package adds the radiator aftercooler and moves up to the 58 CFM dryer.

Why the aftercooler and dryer matter for plasma cutting

Hot air holds water. The radiator aftercooler cools the air on its way from the pump to the tank, so more moisture drops out in the tank and goes out the automatic drain. The refrigerated dryer then chills the air again and removes what is left, with a built-in coalescing filter and its own auto drain. Dry, clean air is what keeps plasma consumables alive and cut edges clean.

Specifications

ModelEmax ESPR07V080V1PK (E450 Silent Air series, dryer package)
Motor7.5 HP, 230V single phase, magnetic starter
Air delivery31 CFM at 100 PSI
Maximum pressure175 PSI
PumpTwo-stage, pressure-lubricated, solid cast iron; rated by Emax for up to 70,000 hours
CoolingRadiator aftercooler
Tank80 gallon, vertical, ASME; automatic tank drain; 3/4 in. outlet
DryerEmax 58 CFM refrigerated air dryer, 115V, built-in coalescing filter and auto drain
ElectricalCompressor: about 39 full-load amps, 50 A breaker recommended by Emax. Dryer and tank drain: standard 115/120V
WeightAbout 763 lb uncrated; about 1,019 lb crated (48 x 46 x 87 in. crate)
IncludedSilent Air intake silencer, isolator pads, belt tensioner, continuous-run control, pump riser

Figures are Emax’s published specifications. Have your electrician confirm wiring and breaker size against the data plate on the unit.

Which shops should buy the package?

Buy the package if you are setting up air from scratch, run a higher-amperage plasma cutter, cut for most of a shift, or work in a humid climate. If you already have a dryer, the 7.5 HP Silent Air compressor on its own costs less. For a lighter-duty table, the 5 HP Silent Air with a 30 CFM dryer covers the baseline.

Three-phase shop? See the 208/230V three-phase and 460V three-phase versions. Our air compressor sizing guide covers CFM, tank size and drying.

Ordering and freight

Order it here or add it to your table quote and we’ll size the whole air system to your plasma cutter. Compressors ship by freight, and freight is quoted separately from the price shown. Get a quote.

Common questions

What electrical service does the 7.5 HP single-phase package need?

230V single phase on a dedicated circuit for the compressor. Emax lists about 39 full-load amps and recommends a 50 A breaker. The dryer and the automatic tank drain plug into standard 115/120V power.

What changed from the old 30 CFM dryer package?

The compressor now has a radiator aftercooler, and the bundled dryer is the 58 CFM model instead of the 30 CFM. The 7.5 HP pump and 31 CFM output are the same.

Is a 58 CFM dryer too big for a 31 CFM compressor?

No. A dryer should be rated at or above the compressor’s output. The extra capacity keeps the dew point steady in hot weather and on long cuts.

Do I still need filtration at the plasma table?

We recommend it. The dryer removes water in the compressor room. A point-of-use air filtration unit at the table catches what the air line adds on the way.

Learn More

Watch and learn more about the Emax Silent Series Air Compressors.

Watch Emax Air Compressors in this documentary.

 

Additional information

Weight 9999999 lbs
Dimensions 999999 × 999999 × 999999 in
Get a Quote